2.375" x 6" 60mm x 150 Exhaust Flexipipe Decat Pipe Clamp-on Flexi Joint 2 3/8"

Description

2.375" x 6" 60mm x 150 Exhaust Flexipipe Decat Pipe Clamp-on Flexi Joint 2 3/8"
This product data sheet is originally written in English.
eBays Number One Exhaust Repair Specialist
All Sizes
Fitting Service
Payment
Contact
STAINLESS STEEL 100% EXHAUST ILOK FLEX
*** 2” 3/8 (60.3mm) x 6” (150mm) ***
*** 3 Year Warranty + Free Fitting Clamps***
This universal replacement flexi can withstand temperatures in excess of 1100 degrees. This is a top quality part for your exhaust and is made from 100% Stainless Steel.
A lot of flexes on eBay claim to be stainless steel but quite often the end caps aren't. When we say 100% Stainless we mean
100%
including the collars.
This flex replaces a blowing or damaged flex on your exhaust.
This flex can be used in your custom built system to reduce wear from engine vibration and to make sure your pipe lines up with the manifold correctly.
100% Stainless Steel Including Collars.
ILOK Lined for Better Performance and Noise Reduction.
In Stock for Same Day Dispatch if ordered before 1 p.m.
Easy clamp on installation (can be welded or clamped).
Genuine OEM Quality.
Free clamps included.
Make Sure You Get What You Pay For
Some sellers offer stainless steel flexes with aluminised collars which is why they can't offer a
3 Year Warranty
. We use Stainless Steel (T304) throughout including the clamp on collars. Aluminised steel is a coated mild steel that will rot rendering the replacement part unusable. Make sure you buy a top quality part and that you get what you pay for.
Why ILOK?
ILOK is a flexible lining that goes inside the flex. It creates a barrier between the gas running internally in the pipe and the flexible bellows on the outside. This means that it can stand higher temperatures and keeps more of the heat in the exhaust gases running through the flex.
Who Is This For?
An ILOK flex has all the advantages of a standard or a lined flex but comes with the added bonus of extra performance. The higher temperatures keep the gases running quicker and smoother which improves the performance of the engine. If you are building a custom exhaust for your car, or you need to replace a flex on a custom exhaust this is for you. Equally if you want the best then go for an ILOK Flex.
What Other Types of Flex Are There?
The two other main types of flex are - braided and lined. Braided flexes are super flexible, whilst lined flexes are quieter than braided. An ILOK flex will last longer than a lined flex in most situations.
Lined Flex
Braided Flex
ILOK Flex
Specification
Clamp On ILOK Flex
Overall Length
Flex Length
Inlet Size (ID)
Collar Length
150mm (6”)
100mm (4”)
60.3mm (2” 3/8)
25mm
Size Not Listed?
Don't worry if you can't find the correct size flexi pipe for your requirement. We have an easy solution - please message/email us with a few simple details and we will be able to supply most sizes, our stocks are changing and growing all the time.
Please Send Us The Following:
The overall length of flexi-pipe required.
The size of the tube that is required to go into the flex.
Other Flexes
Clamp On Flex
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
38 x 200mm Clamp On Flex
42 x 200mm Clamp On Flex
45 x 200mm Clamp On Flex
48 x 200mm Clamp On Flex
50 x 200mm Clamp On Flex
54 x 200mm Clamp On Flex
57 x 200mm Clamp On Flex
38 x 250mm Clamp On Flex
42 x 250mm Clamp On Flex
45 x 250mm Clamp On Flex
48 x 250mm Clamp On Flex
50 x 250mm Clamp On Flex
54 x 250mm Clamp On Flex
57 x 250mm Clamp On Flex
38 x 300mm Clamp On Flex
42 x 300mm Clamp On Flex
45 x 300mm Clamp On Flex
48 x 300mm Clamp On Flex
50 x 300mm Clamp On Flex
54 x 300mm Clamp On Flex
57 x 300mm Clamp On Flex
38 x 350mm Clamp On Flex
42 x 350mm Clamp On Flex
45 x 350mm Clamp On Flex
48 x 350mm Clamp On Flex
50 x 350mm Clamp On Flex
54 x 350mm Clamp On Flex
57 x 350mm Clamp On Flex
Clamp On Flexes Cont'd
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
60 x 200mm Clamp On Flex
63 x 200mm Clamp On Flex
70 x 200mm Clamp On Flex
76 x 200mm Clamp On Flex
90 x 200mm Clamp On Flex
102 x 200mm Clamp On Flex
60 x 250mm Clamp On Flex
63 x 250mm Clamp On Flex
70 x 250mm Clamp On Flex
76 x 250mm Clamp On Flex
90 x 250mm Clamp On Flex
102 x 250mm Clamp On Flex
60 x 300mm Clamp On Flex
63 x 300mm Clamp On Flex
70 x 300mm Clamp On Flex
76 x 300mm Clamp On Flex
90 x 200mm Clamp On Flex
102 x 300mm Clamp On Flex
60 x 350mm Clamp On Flex
63 x 350mm Clamp On Flex
70 x 350mm Clamp On Flex
76 x 350mm Clamp On Flex
90 x 200mm Clamp On Flex
102 x 350mm Clamp On Flex
Weld On Flexes
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
38 x 100mm Weld On Flex
42 x 100mm Weld On Flex
45 x 100mm Weld On Flex
48 x 100mm Weld On Flex
50 x 100mm Weld On Flex
54 x 100mm Weld On Flex
57 x 100mm Weld On Flex
38 x 150mm Weld On Flex
42 x 150mm Weld On Flex
45 x 150mm Weld On Flex
48 x 150mm Weld On Flex
50 x 150mm Weld On Flex
54 x 150mm Weld On Flex
57 x 150mm Weld On Flex
38 x 200mm Weld On Flex
42 x 200mm Weld On Flex
45 x 200mm Weld On Flex
48 x 200mm Weld On Flex
50 x 200mm Weld On Flex
54 x 200mm Weld On Flex
57 x 200mm Weld On Flex
38 x 250mm Weld On Flex
42 x 250mm Weld On Flex
45 x 250mm Weld On Flex
48 x 250mm Weld On Flex
50 x 250mm Weld On Flex
54 x 250mm Weld On Flex
57 x 250mm Weld On Flex
Weld On Flexes Cont'd
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
Size (ID x Length)
60 x 100mm Weld On Flex
63 x 100mm Weld On Flex
70 x 100mm Weld On Flex
76 x 100mm Weld On Flex
90 x 100mm Weld On Flex
102 x 100mm Weld On Flex
60 x 150mm Weld On Flex
63 x 150mm Weld On Flex
70 x 150mm Weld On Flex
76 x 150mm Weld On Flex
90 x 150mm Weld On Flex
102 x 150mm Weld On Flex
60 x 200mm Weld On Flex
63 x 200mm Weld On Flex
70 x 200mm Weld On Flex
76 x 200mm Weld On Flex
90 x 200mm Weld On Flex
102 x 200mm Weld On Flex
60 x 250mm Weld On Flex
63 x 250mm Weld On Flex
70 x 250mm Weld On Flex
76 x 250mm Weld On Flex
90 x 250mm Weld On Flex
102 x 250mm Weld On Flex
Payment
We only accept Paypal payments.
Mastercard, Visa, Maestro, Solo and American Express can be paid onto your Paypal account.
To pay for your item please make sure you fully complete the eBay checkout process and fill in your address.
Please pay within 3 days of ordering.
Your item will be carefully packed and dispatched within 24 hours (Mon-Fri) of receiving cleared payment.
Most items will be posted out the same day if payment is received before 1 pm
Returns Policy
Every Exhaust Part value our customers and have a 30 day Returns Policy. In the unlikely event that the item is not suitable we always aim to work with our customers and rectify any mistakes. You may return the item to us as new within 30 days of receipt for a refund of the cost of the item(s) only and the buyer is responsible for return postage( As per ebay rules). Refund on faulty items will only be issued once the item is tested and proven to be faulty. If there has been an error on the part of Every Exhaust Part i.e., incorrect description, faulty item, then a full refund will be issued on return of the item or receipt of proof of damage. If Every Exhaust Part are at fault then the return postage will be refunded once the item has been received. Refund will be issued using same method as payment.
About Us
We are incredibly proud of the quality and build of our products. We are a small, dedicated and friendly family run firm. We aim to be the most accurate and comprehensive exhaust repair supplier on eBay and work hard to make sure your order gets dispatched as soon as possible.
At Every Exhaust Part we welcome feedback and take it seriously. So if you have a product that you would like to see in our shop, or have a comment about the process, why not send us a message and we'll gladly discuss it with you.
Powered by
eBay Turbo Lister
Every Exhaust Part value our customers and have a 30 day Returns Policy. In the unlikely event that the item is not suitable we always aim to work with our customers and rectify any mistakes. You may return the item to us as new within 30 days of receipt for a refund of the cost of the item(s) only and the buyer is responsible for return postage( As per ebay rules). Refund on faulty items will only be issued once the item is tested and proven to be faulty. If there has been an error on the part of Every Exhaust Part i.e., incorrect description, faulty item, then a full refund will be issued on return of the item or receipt of proof of damage. If Every Exhaust Part are at fault then the return postage will be refunded once the item has been received. Refund will be issued using same method
MPN
EEP1801151175
Brand
Smoothflow
Manufacturer Part Number
EEP1801151175
EAN
Does not apply